Plant Closure: Major Supplier to the Semiconductor Industry

► Onsite and Online Auction
Sale Type:
Thursday, December 12, 2019 at 10:00 AM (PST) and December 17, 2019 Online Auction
Auction Location:

139 Beacon Street

South San Francisco, CA 94080

Inspection Day:
Wednesday, December 11, 2019 from 9am to 4pm (PST)
Auction Contact:

Gary Treisman

info@machinerynetworkauctions.com

+ 1 (818) 788-2260

Customer Service:
* Payment must be in U.S. Dollars.
* An 18% buyer`s premium (“BP”) will be charged on all assets. The BP will be reduced to 16% for all on-site buyers if payment is made within 48 hours of sale close. There is no BP reduction for timely payment for online buyers. 
* Valid State resale certificates must be on file with MNA prior to invoicing.  No exceptions.
* Any item/lot not removed by TBD, shall be deemed to be abandoned.
* By placing a bid, bidder acknowledges and expressly assents to each of the terms and conditions of auction found on the MNA website and auction catalog.
  • Featured Equipment
  • Brochure & Documents
  • Removal
  • Buyers Premium

OVER 1000 LOTS

Horizontal Machining Centers

  • (4) Makino a61nx F.M.S., Super GI.5 Controls, (44) pallet magazine (2) WSS A5 Cell controllers, 20" sq. pallets, 14k rpm, CAT 40, High column, 218 ATC, HP CTS, Probing, High Speed Smooth TCP, New 2018,   low, low hours, < 600 hours each. (Replacement Value $3.2 Million)
  • Mori Seiki NH-8000DCG 4-Axis HMC, MSX-501III Control, (2) 31.5” Sq Pallets, 15k RPM, HSK50 Taper, 140 ATC, Probe, CTS, CC, New 2007
  • Mori Seiki SH-500/50 4-Axis HMC, MSC 502 control, (2) 19.7" sq. pallets, 10k RPM, 120 ATC, Probe, CTS, CC, New 1999
  • (2) Mazak PFH-5800 4-Axis Palletech F.M.S., Fusion 640M Controls, (10) pallet pool, 20” pallets, 15k rpm, 80 ATC, CAT 40, CTS, Probe, Chip Blaster, 2003  (Rebuilt 2017)
  • Tombstones

CNC Turning Centers

  • Doosan Puma 5100B, Doosan-i control, 18” Chuck, New 2016 1100 hours, s/n ML0296-000054
  • Doosan Puma 4100B, Doosan-i control, 15” Chuck, New 2017 1400 hours, s/n ML0278-000139
  • Okuma LB45II/1100, OSP 7000L control, 18" ch, 10 pos. turret, tailstock, chip conveyor, s/n: 0194
  • Okuma LB35II, OSP-7000L control, 15" chuck, 12 pos. turret, Torit dust collector, chip conveyor, s/n: 0467
  • Okuma Simulturn LU300M-2SC600, OSP-E100L control, 10" chuck, 12 pos. upper & 8 pos. lower turrets, Live tooling, C Axis, Torit mist collector, New 2004, s/n: 105679
  • Okuma Impact LU15-MW, s/n: 1576, OSP-U100L control, 25 HP, 4200 RPM, 13.4" Max. turning dia, 20" centers, 2.4" spindle bore, 10" chuck, 12 pos. upper & 8 pos. lower turrets. Live tooling, C & W Axes, LNS Quickload Servo S2 mag. type barfeed, Tailstock, Torit mist collector, Chip conveyor
  • (2) Okuma LU-15 Impact 4-Axis, OSP-UI00L control, Collet chuck, 12 pos.
  • upper & 8 pos. lower turrets, Chip conveyor (SAC), 1997, s/n 1688, 1717
  • Okuma LU-15, OSP-U I00L Control, Live Tooling, C-Axis
  • (3) Okuma LCC15-25 4-Axis, OSP-7000L & OSP-5000L-G Controls
  • Okuma Crown 762S-SB, OSP-700 control,10.6 turning dia., 19.7" center, 2.4" spindle bore, 12 HP, 4,200 RPM, 8" chuck, 12 pos turret, Tailstock, Torit mist collector, Chip conveyor,  s/n: 0265
  • (3) Okuma LR10, OSP 5020L control, Collet chuck, 12 pos. upper & 8 pos. lower turrets, Torit mist collector, Chip conveyor, s/n 0235, s/n 0145, s/n0376
  • (3) Okuma Cadet LNC8 CNC Turning Center, OSP-5000L-G control, 8" chuck, 12 Pos Turret, Torit dust collector, chip conveyor, s/n: C744, C743, 0122, D310

Vertical Machining Centers
  • (2) Doosan DNM 750II, Doosan-i control, 64”x30”x25.6”, 12K RPM, CT40, 30 ATC, New 2017, s/n MV0065-000420, MV0065-000428, 1400+1600 hours
  • (2) Doosan DNM 6700, Doosan-i control, 51”x26”x24.6”, 12K RPM, CT40, 30 ATC, CTS, New 2017, s/n MV0092-00618, MV0092-00420, 1200+3500 hours
  • OKK VM-900 4-Axis, Fanuc 180is-MB control, 81.1"x37"x32.3", 40 HP, 12,000 RPM, Cat 50 taper, 40 ATC, Haas 4th axis fixture, Chip conveyor New 2006, s/n: 122,
  • (2) Mori-Seiki NV5000B/40 4-Axis, MSG-501 Control, 31” x 20” x 20”, 14K RPM, 30 ATC, CTS, 30HP, New 2003, s/n: NV501CB0946, NV501CL1516
  • Mori-Seiki MV-65/50 4-Axis, Moric MFM6 control, 50"x25.6"x25.6", 25 HP, 4,000 RPM, Cat 50 taper, 30 ATC, Coolant thru spindle, Chip conveyor, 1996, s/n: 1179 
  • (2) Mori-Seiki GV-503 4-Axis, MSG-803 Control, APC, 24” x 20” x 18”, 30 ATC, CTS, 2000 & 1999, S/N 64, 9
  • (2) Mori-Seiki SV-500 /40 4-Axis, Fanuc MSC-518 Control, 31”x20”x20”, 20 ATC
  • (6) Mori Seiki MV-40 & MV-40M’s, 4-Axis, MSC-518 & 516 Controls, 8K RPM, CT-40, 20 ATC
  • (3) Kasuga Quantum Q-2000V  4-Axis, Fanuc 18iM Control, 80”x30”x20”, 6K RPM, CT-50, 40 ATC, 30HP, s/n Q8020194, Q7020081, Q01120014
  • (3) Mitsubishi M-V5CN-L 4-Axis, Fanuc 18iM Control, 40”x20”x18”, CT-40, New 1999, s/n V53300, V53436, V55429
  • Brother TC-22A CNC Drill & Tap, CNC-A00 Control, 19” x 15” x 16”, BT-30 Taper, 26 ATC, 10K RPM, 7.5HP, 1998, s/n 111265
  • (12) Haas Rotary tables

Vertical Turret Lathes

  • 60”/70” Honor Seiki VL-125C CNC Vertical Turret Lathe, Fanuc 0iTC Control, 12 Position Turret, New 2009, 6500 hours



CNC Bridge Mills

  • Mitsubishi M-VS 175 5-Axis CNC Vertical Bridge Type Machining Center, Fanuc 15M Control, 125” x 72” x 43” Travels, A & C Axis Indexing Spindle, Cat 50 Taper, 80 ATC, 8,000 RPM, 25HP, CC, New 1998, S/N Q63870
  • Mitsubishi M-VS 25/20 CNC 5-Face Vertical Bridge-Type Machining, Fanuc 18iM Control, 165”x98”x72”, Cat 50 Taper, 60 ATC, Right Angle Head, 4,000 RPM, 30HP, CC, New 2001, S/N OQ61020

CNC & Conventional Tool Room Machinery & Welding
  • SWI Trak 1540V & Fryer Toolmaster 2160 CNC Teach LathesBlue M Heat treat ovens, Graymills Ultrasonic Parts Cleaners, Down Draft Benches
  • Mitsubishi FX-10K CNC Wire Type EDM, Mitsubishi 32 bit control, 13.77"x 9.84" x 8.66", Auto wire thread, Submerged cutting, chiller, 3R fixturing, 1999, s/n: 09K10435
  • SWI Trak 1540V & Fryer Toolmaster 2160 CNC Teach Lathes
  • Victor 24100, Acra Atel-2140SC & Lion C11T Engine Lathes
  • Hardinge HVLH Precision toolroom Lathe, Lions Lathe
  • (4) Lagun Deluxe 3 2-Axis CNC Mills with Anilam controls
  • Several Daito GA260W Auto Horiz. Band Saws & DoALL Vertical Band Saws
  • (2) Parlec Parsetter Tool Presetters, Rego-Fix powergrip Tool Clamp, CEMB Tool Balancer& more
  • (6) Miller TIG & MIG Welders, Panjiris Weld Positioner, Fume extractors, Steel tables & more
  • Arbor & H-Frame Presses

Inspection & Testing
  • Coord 3 Universal 15-10-8 DCC CMM, 59” x 39” x 31”, PH20 probe, New 2017, s/n 4007
  • Mitutoyo Bright Strato 1620 DCC CMM, 63” x 79” x 47”, GeoMeasure, PH10M probe, New 2002
  • (2) Mitutoyo Bright 710 DCC CMM, s/n 241708, 43002
  • Mitutoyo Bright-M 707 & B-231 Manual CMM’s
  • (2) MasterView Comparators

Facilities & Support
  • (4) FS Curtis & Gardner CompAir Rotary Screw Air Compressor, up to 75 HP
  • Coolant collection & reclamation systems
  • (10) Shipping containers
  • Genie scissor lift, tenant flor scrubbers
  • (4)  ½ Ton Jib Cranes + 2 Ton Gantry Crane
  • (3) 40’ containers with contents
  • Pallet racking, workbenches and More!
  • (3) 6,000lb Nissan 60 Forklifts

**  December 17, 2019 - Online Auction Only  **

  • Complete Tool Crib with (20+) Vidmar & Lista cabinets full of contentComplete Tool Crib with (20+) Vidmar & Lista cabinets full of content
  • Massive quantity of tombstones, pallets, tool holders, collets, vises, fixturing, etc
  • Blue M Heat treat ovens, Graymills Ultrasonic Parts Cleaners, Down Draft Benches
  • Fowler-Trimos Horizon Premium 500 SuperMic, Digital Height Gauges, Granite surface plates
  • Varian Leak Detector
  • (3) 6,000lb Nissan 60 Forklifts




* Payment must be in U.S. Dollars.
* An 18% buyer`s premium (“BP”) will be charged on all assets. The BP will be reduced to 16% for all on-site buyers if payment is made within 48 hours of sale close. There is no BP reduction for timely payment for online buyers. 
* Valid State resale certificates must be on file with MNA prior to invoicing.  No exceptions.
* Any item/lot not removed by TBD, shall be deemed to be abandoned.
* By placing a bid, bidder acknowledges and expressly assents to each of the terms and conditions of auction found on the MNA website and auction catalog.

-          Buyers are responsible for removing all of their purchases.  Machinery Network Auctions does not provide rigging or shipping services and is not responsible for any rigging or shipping issues which may arise;

-          11 - 20 December 2019, Monday - Friday, 8:00 AM to 4:00 PM local time:

The Removal days for small, hand carry items (ONE person must be able to list easily);

-          11 December 2019 - 31 January 2020, Monday - Friday, 8:00 to 4:00 PM local time:

Removal days for items requiring a rigger;

-          Please note HOLIDAY REMOVAL HOURS: due to the Holiday Season there will be no removal 28 – 29 November, 24 – 25 December, 31 December, 1 January;

-          Standard Removal Terms apply;

-          Anyone performing removal will need to provide proper insurance.

-          A buyer release form must be completed and supplied to Machinery Network Auction or Hilco personnel if someone other than the registered bidder is picking up auction purchases.  Release forms may be turned into either MNS or Hilco personnel on site or faxed to our office at: (818) 788- 2470;

-          Prequalified riggers offering services for this sale will be listed here as they become available.


  • - An 18% buyer`s premium will be charged on all assets. Onsite cash payments will not be accepted for online only auctions.
  • - An 8.25% sales tax will be applied as required. A 4.3125% sales tax will be applied for partially exempt manufacturing machinery & equipment. View complete sales tax rules. 
  • - All bidders residing outside of the United States or Canada are required to submit via wire transfer a qualifying deposit of 25% of their total expected purchases. Deposit instructions will be emailed upon registration. Deposit must be received and confirmed prior to start of auction, and can take up to 72 hours to clear. Please register at least 3 business days prior to sale to allow sufficient time to process deposit.
  • - Buyers who wish to bid onsite will need complete registration at the auction on the day of the sale or during preview.