Aerojet Rocketdyne Missile & Rocket Propulsion Manufacturing Facility Composite Structure Forming, Advanced Large Capacity Heat & Vacuum Treating, CNC Machining, Test & Inspection Equipment. Huge selection of Tooling, Facilities & Support

► Onsite and Online Auction
SALE DATE:
Tuesday, December 10, 2019 at 10:00 AM (PST) and Online Only Auction on January 22, 2020
Auction Location:
2001 Aerojet Road 
Rancho Cordova, CA 95742 USA
Inspection Day:
Monday, December 09, 2019 from 9am to 4pm (PST) or earlier by appointment. Aerojet Rocketdyne reserves the right to refuse entry to anyone.
Auction Contact:

Gary Treisman

info@machinerynetworkauctions.com

+ 1 (818) 788-2260

Customer Service:

info@machinerynetworkauctions.com

+ 1 (818) 788-2260

▼ Terms and Conditions
* Payment must be in U.S. Dollars.
* An 18% buyer`s premium (“BP”) will be charged on all assets. The BP will be reduced to 16% for all on-site buyers if payment is made within 48 hours of sale close. There is no BP reduction for timely payment for online buyers.
* Valid State resale certificates must be on file with MNA prior to invoicing.  No exceptions.
* Any item/lot not removed by January 31, 2020, shall be deemed to be abandoned.
* By placing a bid, bidder acknowledges and expressly assents to each of the terms and conditions of auction found on the MNA website and auction catalog.
  • Featured Equipment
  • Brochure & Documents
  • Removal
  • Buyers Premium
COMPOSITE MANUFACTURING
  • Entec Twin-Spindle, 5-Axis Filament Winder, MaxWeight per Mandrel: 5,000-Lbs, w/ (2) 16-Spindle Tensioners, 32-Spindle Redirect, Stand, Retrofit in 1997 w/ CMC HDL PC-Based Control, s/n ECM02393 / CMC468
  • Entec 5K72-168-5 5-Axis Filament Winder, Max Mandrel Weight: 8,000-Lbs, w/ (2) 12-Station Tensioners, Tensioner Carriage, Retrofit in 1998 w/ CMC1 PC-Based CNC Control, Operator Pendant Control, s/n EN010239
  • Entec 5K48W.N-X-4/TC 3-Axis Filament Winder, w/ 12-Spindle Tensioner, PC-Based Control, Operator Joystick Control, s/n ECM02393
  • Entec Gear Driven Helical Filament Winder, w/ (4) CTC Tensioner Dials
  • Entec TW96-168-6 Horizontal Tape Wrap Machine, S/N 10248, w/ Carriage, Tension & Ram Assemblies, Pendant Mounted Control, s/n 10248
  • Entec TW90-120-6 Horizontal Tape Wrap Machine, w/ Carriage, Tension & Ram Assemblies, Pendant Mounted Operator Control, Torit Donaldson VS Fume Collector w/ Spark Arrestor, s/n 10242
  • Monarch Missile Master 90" x 204" Engine Lathe, 50” t-slotted faceplate, threading, DRO, 250-RPM, 20 HP Motor, s/n 43483, New 1959
  • Gerber Cutting Edge DCS2500 Mechanical Cutter, 82” x 25’L table, PLC control,

HEAT TREAT
  • Abar Ipsen HR-120x152VC 6-Bar MetalMaster Horizontal Vacuum Compression Braze Furnace, Hot Load Zone Size 120” x 120” w/Rotator, 84" W x 84" H x 152" L Hearth, Max Load & Temperature: 5000-Lbs @ 2400°F w/ Hearth; 2500-Lbs @ 2200°F  w/ Rotator,  Rotator Speed: 1/2 to 10-RPM, 6-Bar Positive Pressure Heat Treating/Inert Gas Cooling, Argon Backfill & Partial Pressure, Hydrogen Purge, Graphite Hot Zone, Controlled Cooling, CompuWatch Control System, A-Bradley PanelView 1400e PLC, auto load/unload system, s/n 1825 (New 2002)
  • Baron 200A650 Electric Autoclave, Max 200-PSI @ 650°F, appox 10’ ID, 37'L x 12'W x 12'H OA dims, , w/ 15'L x 5'W 2-Cart Traveling Loader, (6) Vacuum Sensors, (12) TC Inputs, Allen-Bradley PanelView 600 PLC , S/N F-1640 (New 1982)
  • Baron 350°F Electric Oven, 72' L x 15' W x 13'6"H, 3-Zone, 2-Door
  • Grieve 400°F Electric Walk-In Oven, 10'W x 22'D x 8'H Chamber, 2-Doors, s/n 660514
  • Grieve HB-500 500°F Electric Oven, 27"W x 48"D x 71"H Chamber, 2-Doors, s/n 510024
  • Despatch PWC3-14-1E 500°F Electric Walk-In Oven, 60"W x 64"D x 64"H Chamber, s/n 14465
  • Thermal Electric Walk-In Oven, 120"W x 240"D x 120"H Chamber, w/ 2-Doors
  • Grieve Electric Walk-In Oven, 7'W x 16'D x 7'H Chamber, w/ 2-Doors
  • Baron EF-8128 150-kW Electric Walk-In Oven, 96"W x 144"D x 96"H Chamber, w/ 2-Doors, s/n F2450
  • Baron-Blakeslee EF-VB-2H Electric Oven, 50"W x 52"D x 42"H Cahmber, s/n F-38009
  • Electric Walk-In Oven, 48"W x 96"D x 72"H Chamber , 2-Doors
  • Russells GB-64-105-AC Elite Series Electric Environmental Test Chamber, 48"W x 48"D x 48"H Chamber, w/ Watlow Ramping Controller & Digital Temperature Control , s/n 05114002
  • Test Equity Series 1000 1007S Environmental Test Chamber, 24"W x 22"D x 18"H Chamber, s/n 30224

MOLDING PRESSES
  • 300 Ton Technical Machine Products Heated Platen Hydraulic Molding Press, 36" Stroke & Daylight, 36" x 26" Platens , s/n 4 (New 2004)
  • 200 Ton Wabash 200-36-2TM Heated Platen, Up-Acting Hydraulic Press, 36" Stroke,
  • 36" x 36" Platens, 43-1/2" x 20-1/2" Between Posts, s/n 6333
  • 20 Ton Wabash 20-1515-2TMX Heated Platen, Up-Acting Hydraulic Press, 12" Stroke,
  • 14" Daylight, 15" x 15" Platens, s/n 7852

CNC MACHINE TOOLS
  • Hamilton Standard AVR EBW (7.5) 52 x 36 x 36 Electron Beam Welder, Anomatic Control, s/n 229 Remanufactured 2000
  • 72” G & L CNC Vertical Turret Lathe, Fanuc 11T, 5 Position Turret, s/n 520-165
  • 42” G & L CNC Vertical Turret Lathe, Fanuc 0i-TD, 5 Position Turret, s/n 511-122-88, Retrofitted with new drives & control in 2015
  • Haas TL-3 20" x 60" Flat Bed CNC Lathe, s/n 3083055 (New 2008)
  • Haas HS-1 4-Axis CNC Horizontal Machining Center, s/n 50336 (New 1997)
  • Milltronics MB-30 CNC Vertical Mill, Centurion 7 control, 60”x30”x28” travels, s/n 10144 (New 2007)
  • Milltronics MB-20A CNC Vertical Mill, Centurion VI control, s/n 4628
  • Mori Seiki MV-45B/40 CNC 4 Axis Vertical Machining Center, Fanuc 10M, 30 ATC, CT40, 6000 RPM
  • s/n 1099
  • Mori Seiki SL-5B CNC Turning Center, Fanuc 11T Control, 12” chuck,
  • Okuma LB-15 CNC Turning Center, OSP5020L Control, s/n 0306 A349
  • Sodick AQ550L Wire EDM, LN1W Control, 21.7” x 13.8” x 11.8” trvls, AWT, chiller, s/n C252

TOOL ROOM EQUIPMENT
  • (2)  Bridgeport Series I Vertical Milling Machines, DRO, pwr feeds, s/n BR254513 & BR246886,
  • Romi E-45B 33.5” x 120” Engine Lathe
  • Victor 20" x 60" Engine Lathe, S/N 78126
  • LeBlond 16” x 54” Engine Lathe
  • Clausing-Colchester 15" x 45" Engine Lathe, S/N VT 1964, to 2500-RPM, 2-Axis DRO
  • Monarch 13" x 54" Engine Lathe, S/N 41026
  • 42” Blanchard 22AK-42 Rotary Surface Grinder, s/n 15549 ((New 1983)
  • (3) Cincinnati Monoset Tool & Cutter Grinders
  • Winslow HC101 Exactamatic Drill Grinder, S/N 00244
  • Royal Oak Form Relieving Grinder
  • Pratt & Whitney Radius Grinder, S/N CG 1055
  • Brown & Sharpe 618 Micro Master Surface Grinder, S/N 523-6181-3467
  • SIP HYDR-6 Hydroptic Jig Borer, S/N 235
  • DeVlieg 3B-48 Spiramatic Jig Mill, S/N 14-227
  • Scotchman 35-Ton Hydraulic Ironworker, S/N 8212 FT6 282
  • DoAll 20" Vertical Band Saw, S/N 339-76427
  • DoAll C-1216A 12" x 16" Horizontal Band Saw, S/N 373-79392
  • Rotex 18B Manual Turret Punch, S/N 11186
  • (3) 125 Ton & 50 ton Dake H-Frame Hyd Shop Presses
  • 60 Ton KR Wilson H-Frame Hyd. Shop Press
  • Clemco AC2448 24" x 48" Blast Cabinet, S/N 319
  • P&G Pram 31 58" x 42" Abrasive Blast Cabinet, S/N 218

QUALITY ASSURANCE
  • Sheffield Endeavor 12.30.10 DCC Coordinate Measuring Machine, 48” x 120” x 40” travels, control
  • Sheffield RS-150 DCC Coordinate Measuring Machine
  • Axiam 4060-104 Profile Gauge
  • Spray Tech Liquid Penetrant Spray Booth, 2-Booths, Overall Size: 45'L x 15' W x 15'6" H
  • Industrial & Precision Scales
  • Metrology equipment including Optical Comparators, Granite Surface Plates from huge to small, Calipers Mics, verniers, etec,
  • Electronic Test Equipment

FACILITIES & PRODUCTION SUPPORT
  • Electrostatic Lining Applicator with conveyor, PLC control
  • (2) Fabricated Structural Steel Modular Work Cell, 18'6"W x 42'L x 11'H Overall, 10' Under Beams, Bolted I-Beam Construction, Wired for Electric & IT Networking, Piped for Air & Vacuum, Lights, 1 w/A/C Unit
  • 45'W x 50'L x 14'H Modular Enclosure, w/ (2) Power Retractable Roof Panels, Power Overhead Doo, Man Doors, Lights, Wired for Electric, Piped for Air/Vac/Sprinklers, Ventilation
  • 18'W x 22'L x 10'H Modular Offices, Bolted Panel Design, w/ Lights, Wired for Electric, Piped for Air/Vac/Sprinklers, Ventilation, Man Doors
  • Binks Spray Booth, 15'W x 25'D x 12'H, Bolted Steel Construction, Fans, Lights, Sprinklers
  • Viking Spray Booth, 9'W x 12'D x 11'H, w/ Double Doors
  • Huge Quantity of Lista and Stanley Vidmar Tool Cabinets   - 60+
  • Knaack Job Bxes, Stronghold Vertical Storage Cabinets, Assorted rolling tool carts
  • Forklifts - Diesel, LPG & Electric
  • Trailers 
  • Full electrical, mechanical and hydraulic maintenance shops
  • Dust Collectors, Hose Crimping Press, Ridgid Pipe Threaders, Double End Grinders, Jib Cranes, Arbor Presses, Steel Layout ables, Worktables & Benches, Hand & Power Tools, Tool Boxes, Storage Cabinets, Platform Scales, Metro Racks, Machining Accessories, Tool Holders, Perishable Tooling and Much More!





▼ Terms and Conditions
* Payment must be in U.S. Dollars.
* An 18% buyer`s premium (“BP”) will be charged on all assets. The BP will be reduced to 16% for all on-site buyers if payment is made within 48 hours of sale close. There is no BP reduction for timely payment for online buyers.
* Valid State resale certificates must be on file with MNA prior to invoicing.  No exceptions.
* Any item/lot not removed by January 31, 2020, shall be deemed to be abandoned.
* By placing a bid, bidder acknowledges and expressly assents to each of the terms and conditions of auction found on the MNA website and auction catalog.
MNA TERMS and CONDITIONS.pdf
Aerojet-MNA-Brochure.pdf

-          Buyers are responsible for removing all of their purchases.  Machinery Network Auctions does not provide rigging or shipping services and is not responsible for any rigging or shipping issues which may arise;

- 11 - 20 December 2019, Monday - Friday, 8:00 AM to 4:00 PM local time:

The Removal days for small, hand carry items (ONE person must be able to list easily);

- 11 December 2019 - 31 January 2020, Monday - Friday, 8:00 to 4:00 PM local time:

Removal days for items requiring a rigger;

- Please note HOLIDAY REMOVAL HOURS: due to the Holiday Season there will be no removal 28 – 29 November, 24 – 25 December, 31 December, 1 January;

- Standard Removal Terms apply;

-          Anyone performing removal will need to provide proper insurance.

-          A buyer release form must be completed and supplied to Machinery Network Auction or Hilco personnel if someone other than the registered bidder is picking up auction purchases.  Release forms may be turned into either MNS or Hilco personnel on site or faxed to our office at: (818) 788- 2470;

-          Prequalified riggers offering services for this sale will be listed here as they become available.


  • - An 18% buyer`s premium will be charged on all assets. Onsite cash payments will not be accepted for online only auctions.
  • - An 9.75% sales tax will be applied as required. A 4.3125% sales tax will be applied for partially exempt manufacturing machinery & equipment. View complete sales tax rules.
  • - All bidders residing outside of the United States or Canada are required to submit via wire transfer a qualifying deposit of 25% of their total expected purchases. Deposit instructions will be emailed upon registration. Deposit must be received and confirmed prior to start of auction, and can take up to 72 hours to clear. Please register at least 3 business days prior to sale to allow sufficient time to process deposit.
  • - Buyers who wish to bid onsite will need complete registration at the auction on the day of the sale or during preview.