Plant Closure: Major Oil Tool Company

► Onsite and Online Auction
SALE DATE:
Thursday, October 10, 2019 at 10:00 AM (CDT)
Auction Location:

517 Interior 5 
Parque Industrial Almacentro 
Apodaca, Nuevo Leon
Mexico  66600



Inspection Day:
Wednesday, October 09, 2019 from 9am to 4pm (CDT)
Auction Contact:

Gary Treisman

info@machinerynetworkauctions.com

+ 1 (818) 788-2260

Customer Service:

info@machinerynetworkauctions.com

+ 1 (818) 788-2260

▼ Terms and Conditions

* Full Service Assistance to USA Buyers for Customs and Logistics Services. Shipping Documentation for Buyers Outside of Mexico, Mexico Maquiladora Buyers and Non-Maquiladora Buyers will be Provided upon Receiving all Required Information from all Buyers. Door-to-Door Rigging and Shipment Services Offered via Companies Listed on our Website for all Buyers
* Payment must be in U.S. Dollars.
* Payment, including 18% Buyer’s Premium, is due within 24 hours of receipt of invoice.
* Valid Bill of Lading must be shown and on file with MNA to avoid local sales tax.  No exceptions.
* Any item/lot not removed by TBD, shall be deemed to be abandoned.
* By placing a bid, bidder acknowledges and expressly assents to each of the terms and conditions of auction found on the MNA website and auction catalog.


  • Featured Equipment
  • Brochure & Documents
  • Removal
  • Buyers Premium

Turning Centers


  • Okuma Impact LU-45 3000, OSP-P200L, Twin Turrets, 10" Bore, Bison 24" Chuck Front and Rear, Programmable SMW Autoblok SLUZ32 Steady Rest (On Lower Turret) 1.97”- 7.87” Capacity,12 + 10 Position Turret, 2800 RPM, s/n 131075, New 2007 (2) Okuma LB45IIR-C3000, OSP-P200LA-R Control, Prgm SMW Autoblok k5.1 Steady Rest, s/n 161137, s/n 161817, New 2012 << VIDEO LINK >>
  • Okuma LB45IIC 4000, OSP-P200L Control, 8" Bore, 25" 3 Jaw Hydraulic Chuck, SMW Autoblok K5-ZSW Steady Rest 3.15" - 15.35" Cap., 12 Position Turret, 900RPM, s/n 129984, New 2007 << VIDEO LINK >>
  • Okuma LB45IIC 3000, OSP-P200L Control, 10" Bore, 25" SMW Autoblok 630-BH Hydraulic 3 Jaw Chuck, 36" Swing, SMW K5-ZSW Autoblok Steady Rest 3.15" - 15.35" Cap., 12 Position Turret, 2800 RPM, s/n 126962, New 2006 << VIDEO LINK >>


  • Okuma LB35II-R, OSP-P200LA-R Control, 5" Spindle Bore, Programmable 20" 3 Jaw SMW 500 BH Autoblok Hydraulic Chuck, K4ZSW SMW Autoblok Hydraulic Steady Rest, 12 Position Turret, 2800 RPM, s/n 161288, New 2012 << VIDEO LINK >>


  • Okuma LB-35IIC-2000, OSP-7000L Control, 80" Center, 6.5" Bore, 20" SMW Autoblock 500 BH Hydraulic Chuck, 12 Position Turret, 1400 RPM, s/n 0499, New 2001 << VIDEO LINK >>
  • (2) Okuma Captain L470M 1250C, OSP-P100 Control, 50" Center, Live Tool, C Axis, 16.5" Max Turn Diam. X , 25.6" Max Turn Length, 4.3" Spindle Bore, 15" 3 Jaw Chuck, Programmable SMW Autoblok SLU5.AS Steady Rest, 12 Position Turret, 3000 RPM,Tool Eye, Chip Conveyor, s/n 119116, s/n 114719 New 2005 << VIDEO LINK >>
  • (4) Okuma Captain L370, Okuma OSP-P200L, Kitagawa B-210 10" 3 jaw chuck, 26" between centers, 12 position tool changer, 3/4" Bore, 3/4" Tailstock, 220 Volts, 3000RPM, s/n 514775, s/n 513871, s/n 109170, s/n 122443, New 2006 & 2004 << VIDEO LINK >>
  • (2) Okuma & Howa HL-35L, Fanuc 18iT, 35" CC, 12" Chuck, 3” spindle bore, s/n 2027, s/n 4016, New 2001 & 2002 << VIDEO LINK >>




Machining Centers

  • (2) Okuma Millac 852V 4 Axis Vertical Machining Centers, OSP-P200M control, 81" x 33 x 30" trvls, rotary fixture, 6000 PM, CT-50, 36 ATC, s/n 85666 & 85635, New 2007 << VIDEO LINK >> << VIDEO LINK >>
  • Okuma & Howa Millac 761V 4 Axis Vertical Machining Center, Fanuc 16iM Control, 60.6" x 29.9" x 26" trvls, rotary fixture, CT50, 36 ATC, s/n 75118, new 2002 << VIDEO LINK >>
  • Okuma MB 56VB 4 Axis Vertical Machining Center, OSP-P200M control, 2007 << VIDEO LINK >>
  • Okuma & Howa Millac 561V, FANUC 16i-MB, 53" x 22" Table, 30 ATC, Cat 50, 6000 RPM << VIDEO LINK >>
  • (2) Okuma & Howa Millac 511V Vertical Machining Center, FANUC 18-M Control, 50" x 20" Table, 30 ATC, Cat 50, 6000 RPM << VIDEO LINK >> << VIDEO LINK >>


  • Mori Seiki MH-630 4-Axis Horizontal Machining Center, Fanuc MSC-516, (2) 25" pallets, CT-50, 60 ATC, through spindle coolant, s/n 829, new 1998 << VIDEO LINK >>
  • (5) Tsudakoma 4-axis rotary tables up to 16”



CNC Gun Drill

  • Unisig USK38 CNC Gun Drill, Fanuc 0i-MC control, Knee type, BTA, 1.5" max drill OD x  48"-80" depth, 48" x 48" 2 axis table, s/n 1792, New 2009


Conventional Toolroom Machinery

  • Weiler E70x3000 Hollow Spindle Flat Bed CNC Lathe, 8.5" Spindle Bore, 28" Sw x 118" Centers, 17" swing OCS, 24” Chuck Front and Rear, 50 HP, s/n GA 01, New 2011
  • 32" x 120" Takoma CW6280E/3000 HD Engine Lathe
  • Hardinge HLV-H Precision Tool Room Lathe
  • Lagun FTV 1 CNC vertical Mill, Acu-Rite control
  • Bridgeport Series II Special Vertical Mill DRO, Pwr feed, vari-speed
  • Agie Engemaq EDM 800NC Sinker EDM
  • Hyd-Mech H-11A NC Horizontal Band Saw, 11" x 13.5" rect cap, 11" round, s/n Z0817122, New 2008 << VIDEO LINK >>
  • Uni-Tek 400 Tap Disintegrator
  • Jones & Shipman and K.O.Lee Tool & Cutter Grinders


Inspection and Quality Control

  • Faro Platinum Arm
  • 14" Mitutoyo PH-A14 Optical Comparator with Multi-function DRO, new
  • B&S Height Gauges, Starrett micrometers, granite surface plates, Mitutoyo digital calipers, Gagemaker dial calipers, pin gage sets, thread gages, and more.


Facilites & Rolling Stock

  • (2) 6000lbs Mitsubishi FGC30 Forklifts w/ fork extensions
  • (2) 50 HP Atlas Copco GA37 Rotary Screw Air Compressors
  • (12) Jib cranes up to 22’
  • Parker Zander Arctic Star Air Dryer, Generac Pressure washer, Huge quantity of assorted tool holders, CAT 50 tool holders, Kurt vises, Drill indexers, endmills, rotary chucks, carbide inserts, spade drills, tool cutters, boring heads, boring bars, 3-jaw chucks, work benches, Raw material and scrap.


*** OFFSITE Machines Located at (DFW, TX)


  • (3) Cope EPT-120/16, 4.7” diam. Rubber Extrusion System, PLC Allen Bradley control, 16:1 L/D, 8000 kg, 1:40.2, 200 HP, with Y-Clamps Controls, as New as 2013





▼ Terms and Conditions

* Full Service Assistance to USA Buyers for Customs and Logistics Services. Shipping Documentation for Buyers Outside of Mexico, Mexico Maquiladora Buyers and Non-Maquiladora Buyers will be Provided upon Receiving all Required Information from all Buyers. Door-to-Door Rigging and Shipment Services Offered via Companies Listed on our Website for all Buyers
* Payment must be in U.S. Dollars.
* Payment, including 18% Buyer’s Premium, is due within 24 hours of receipt of invoice.
* Valid Bill of Lading must be shown and on file with MNA to avoid local sales tax.  No exceptions.
* Any item/lot not removed by TBD, shall be deemed to be abandoned.
* By placing a bid, bidder acknowledges and expressly assents to each of the terms and conditions of auction found on the MNA website and auction catalog.


MNA TERMS and CONDITIONS.pdf
SBMEX-Brochure-Final.pdf
LAST AND FINAL REMOVAL DATE FOR THIS AUCTION IS Friday November 8th, 2019.
RIGGING/REMOVAL IS THE RESPONSIBILITY OF THE BIDDER/BUYER AND ALL RIGGERS ARE REQUIRED TO BE LICENSED, INSURED AND APPROVED BY THE AUCTIONEER.  Every effort will be made to facilitate removal.  All removal activity must be in accordance with OHSA guidelines.  Removal may begin when the auction has been completed and Payment IN FULL has been made.  ANY LOT NOT REMOVED FROM THE PREMISES BY Friday November 8th, 2019, SHALL BE REMOVED, RESOLD AT PUBLIC OR PRIVATE SALE AND/OR SCRAPPED BY AUCTIONEER, at their sole discretion, WITHOUT FURTHER NOTICE AND THE COSTS OF SAME SHALL BE CHARGED TO DEFAULTING BUYER.
The Buyer’s Premium shall be added to your invoice and calculated as part of your total due prior to removal.
The Buyer’s Premium for this auction is:- An 18% Buyer’s Premium will be charged on the sale of all assets. 
- The Buyer’s Premium will be reduced to 16% for all onsite buyers if payment, in full, is made by means of cash, wire, cashier’s check, company check (with bank letter of guarantee) within 48 hours of the close of the sale.  An 18% Buyer’s Premium will be charged for all BidSpotter purchases with no discount of prompt payment.