FEATURED ITEMS
TURNING
CNC Swiss Type Turning Center
- Citizen Cincom A32, Mits control, 1 ¼” cap., sub-spdl, live tool, C axis, Edge 332 Bar loader, New 2009
- Miyano Evolution BNJ-42SY3, Miyano-Fanuc , 1.65” bar cap. , sub-spdl, two turrets, live tool C & Y axes, 12’ Edgetech bar loader, New 2011
- Miyano BNA-42S2, Fanuc 0i-TB, 1.65” bar cap., sub spdl, live tool C axis, New 2013
- (4) Miyano BNA-42S, Fanuc 0i-TD, 1.65”/1.33” bar cap., sub-spdl, live tool, past cathcher, chip conveyor, Edge Technologies M-542 Bar loader, New 2013
- (3) Miyano BNJ-42S, Fanuc 18i-TB, 1.65” bar cap., sub-spdl, two turrets, live tool, C axis, Iemca Boss 547 bar loader, New 2004
- (2) Miyano BNE-51SY, Fanuc 18i, 2”/1.6” bar cap., sub-spdl, live tool, C& Y axes, Iemca Boss 547/37 Bar loader, New 2005
- Miyano BX 26S 8-Axis ,Fanuc 18iTB, 1” cap., sub-spdl, Live tool, C axis, FMB turbo 3-26 bar loader, New 2007
- (2) Miyano LZ-02RY, Fanuc 21iTB, 3.9” max OD, live tool, C & Y axes, New 2004
Twin Spindle Machines
- (2) Fuji CSD300, Canvas ctrl, 2.2” spdl bore, gantry loader & stocker, New 2014
- Fuji PMD-20T, Fanuc 180i-TD, 1.65” spdl bore, gantry loader, New 2007
- (3) Muratec MW200, Muratec-Fanuc, 2.5” bore, 10” chuck, live tool, C axis, as new as2012
- (9) Muratec MW120, Muratec-Fanuc, 1.85” bore, 8” chucks, as new as 2013
- (2) Mazak Dualturn 20, Mazatrol T-Plus, 2.4” bore, 8” chuck + collet, (1) w/GL100 loader
- Mazak Multiplex 620, Mazatrol T32-6, 2.4” bore, live tool, C axis, New 1989
- Mazak Multiplex 615, Mazatrol T32-6, 2” bore, live too, C axis, New 1992
- (2) Mazak Mulitplex 420, Mazatrol T32-4, live tool, C axis, New 1992
- Okuma & Howa ACT-2SP, Fanuc 0T, 8” & collet chuck, New 1992
CNC Lathes & Turning Centers
- (2) Samsung SL25ASY 5-Axis, Fanuc 0iTD, 3” spdl bore, Sub spdl, Live tool, C & Y axes, 12’ Edge Tech Patriot 551 Bar Feed, New 2011
- Samsung SL25BMC/500, Fanuc 0i-TD, 3” bar cap., live tool, C axis, New 2010
- (3) Samsung SL30A/1000, Fanuc 0i-TC, 3.6” spdl bore, 40” centers, New 2008-09
- (3) Samsung SL25A/500, Fanuc 0i-TD, 3” bar cap., as new as 2014
- Daewoo Puma 300LMC, Fanuc 21i-TB, 4.5” spdl bore, long bed, live tool, C axis, New 2009
- Daewoo Puma 300LMB, Fanuc 21-iT, 4“ spdl bore, live tool , C axis, New 2006
- Daewoo Puma 300M GL, Fanuc, 21iT, 4” spdl bore, live too, gantry loader, New 2003
- (3) Daewoo Puma 300B, Fanuc 21i-TB, 3” spdl bore, 3500 RPM, New 2003-04
- Daewoo Puma 230M GL, Fanuc 21iT, 3” spdl bore, live tool, gantry loader, New 2002
- Haas SL-30T CNC Turning Center, 4.6” spdl bore, 34” centers, New 2006
- Techno Wasino A12, Fanuc 18T, 2” spdl bore, live tool, C & Y axes, loader, New 1999
- (2) Techno Wasino LJ-5, Fanuc 21T, 2.1” spdl bore, loader, New 1999
- Okuma Captain L370, OSP E100L ctrl, New 2003
- Mazak QT-28 N & QT-15N
- Okuma LB15 & LC20
- Takisawa TS-25, Fanuc 6T
Gang Type CNC Lathes
- (2) Fuji FS4-31G, Fanuc 21iT w/touch screen, 2.2” spdl bore, 4K RPM, loader, New 2003
- (6) Techno Wasino G7, Fanuc 21iT, 2” spdl bore, 5” chuck, loader, New 1999
- (2) Techno Wasino G6, Fanuc 21it, 1.75” spdl bore, 5” chuck, loader New 1999
- (3) Techno Wasino LG-7, Fanuc 0T, 1.6” spdl bore, 6” chuck, loader, New 1998
- (3) Techno Wasino LG-6, Fanuc 0T, 1.6” spdl bore, 5” chuck, loader, New 1998
- (2) Techno Wasino SG-5, Fanuc 0T, 1.1” spdl bore, collet chuck, loader, New 1998
CNC VTL’S
- (2) Samsung SLV 80 Vertical Turret Lathe, Fanuc 0I-TD, 18” Ch, 35” Swing, 40 HP, New 2012
- (2) Okuma & Howa ACT-V3R, Fanuc 0T, 12” chuck, 30 HP, New 1989
CNC MACHINING:
Vertical Machining Centers
- (3) Doosan DNM500 4 Axis VMC, Fanuc 18i, w/Komo 4th Axis Table, New 2010-2011
- Haas CNC VF-3SS, 12K RPM, side mount ATC, New 2006
- **(3) Hyundai-Kia Hi-V50D 4 Axis VMC, Fanuc 0i-MB, rotary pallet table, New as 2006
- **(12) Kira KN40V6, VTC-40S, VTC-30E’s & KN40VS CNC VMC’s, as new as 2004
- Hardinge Conquest VMC-700, Fanuc 18M, New 1996
Horizontal Machining Centers
- Okuma & Howa Millac 44H 4-Axis , Fanuc 18i-MB, (2) 16” x 20” pllts, CAT 40, 12K RPM, New 2005
- (3) Toyoda FA400, 4-Axis, Fanuc 16iM, (2) 16” pllt, 8K RPM, New 2000
CNC Drilling & Tapping Centers
- (7) Brother TC-S2DN, B-00 control, w/Nikken 5-Axis table, New as 2013
- (8) Brother TC-S2D, B-00 control, w/Nikken 5-Axis table, New as 2012
- (2) Brother TS-S2D, B-00 control, w/Nikken 5-Axis table, New 2010
- Fanuc Robodrill Model AlphaT21lD, New 2004
- Fanuc Robodrill Alpha T10-A Drilling & Tapping Center
- (3) Hyundai-Kia Hi-V50D 4 Axis VMC, Fanuc 0i-MB, Rotary Pallet Table, New 2006
- (11) Kira's including KN40Vb, KN40VS, KN40VA, VTC-40S & VTC-30's, New 2004
- Miyano MTV-C410 Drilling & Tapping Center, New 2003
GRINDERS
CNC Cylindrical
- Supertec G31A-50 Angle Head, Fanuc 0i-TD ctrl, 12” x 40”, New 2010
- (3) Toyoda Select G-100 Universal, GC32 control, 12” x 40”, New as 2004
- (2) Toyoda GL4A-100EII Angle Head, GC32 ctrl, New 2000
- Mitsubishi RD23 Angle Head, Fanuc 16T, 12” x 14”, Marposs Gauging, New 1998
- Okamoto OGM-8-20U Universal, Fanuc MDI, New 1998
Centerless Grinding
- Micron MD-600III-15D CNC, Fanuc PowerMate, 7” max OD, 24” GW, 25 HP, New 1998
- Koyo KC-200 CNC, Fanuc 0M, 4.7” max OD, 24” GW, 15 HP, New 1988
- Cincinnati Centuramic 220-8
- Cincinnati 230-10 Twin Grip
Gear Machinery
- Mitsubishi GHD10A 6-Axis Hobber, Fanuc 180i-MB ctrl, 100mm, New 2004
- Kashifuji KN 150, Fanuc, Vertical Gear Hobber
- (7) Barber-Colman Gear Hobbers, 16-36, (2) 6-16’s and (4) 14-15’s
Spline Rolling Machines
- Anderson Cook Marand 3306 Automatic Flat Die Spline Roller, A-B PLC control, New 2014
- Anderson Cook 340 Automatic Spline Roller A-B PLC control, Michigan 3237
Vertical Broaches
- TY Miles MBPU- 24-48-60, 12 Ton x 48” stroke, PLC control, New 2001
- TY Mile MBLD 10-36-120R, 5 Ton x 36” stroke, PLC control, New 2003
- Ty Miles MBLD 16-48-60R, 8 Ton x 48” Stoke, PLC control & loader, New 1998
Induction Heat Treat Systems
- Pillar AB7102-114/MK 11 Induction Heat Treat System, 200KW @ 3KHZ MK 11, Pillar MK 11, w/ Thermal Care Portable Chiller Model NQA20 / Like New 2015
- InductoHeat Statipower
Coordinate Measuring Machines & Inspection
- Zeiss Contura G2 10/16/6 Aktiv Scanning DCC CMM, VAST XTG probe, styli changer, New 2013
- Zeiss EC4040 CNC Coordinate Measuring Machine, RDS motorized probe, New 2001
- Faro Gage Plus F04 3D Laser Measuring Arm, New 2009
- M&M Micro Top Gear Analyzer, New 2004
- Mahr MMQ400 Surface Gauge, New 2013
- Mitutoyo C3000 Form Tracer Surface & Contour Gauge, New 2004
- Magnaflux Magnetic Particle Inspection Units
- Starrret, Deltronic & J&L Optical Comparators
- Zoller, Parlec & Kelch Tool Presetters
Multi Spindle Screw Machines
- (3) National Acme Gridley RB-8, 1-1/4" & 1-5/8" 8-Spindle Automatics
- (7) National Acme Gridley RB-6, RA-6, 1-1/4" & 1-5/8" & 2-5/8" 6-Spindle Automatics
Saws
- (2) Amada HA250W Automatic Horizontal Band Saws, 10” cap., as new as 2007
- (4) Amada HFA250W Automatic Horizontal Band Saws, 10” cap, as new as 1999
- DoAll Vertical Band Saws, Everett Chop Saws, Miter Saws, Leco Sample Saws
Tool Room & Conventional Machinery & Equipment
- Clausing Metosa MC17 CNC Teach Lathe Fagor control, 17” Sw x 40” CC, New 2011
- Sodick A320D CNC Wire EDM, New 1998
- Moore #3 Jig Grinder with DRO
- 2013 BTI VR500CD Automatic Flywheel Balanicng Machine, h & V drills
- Clausing, Sharp Engine Lathes
- Hardinge 2nd Op Lathes
- Bridgeport, Chevalier & Acra Vertical Milling Machines
- Chevalier, B&S, Boyar Schulz & Covel Surface Grinders
- Parker Majestic OD Grinder
- Stand Modern Radial Drill
- Gun Drill
- Solberga, Clausing-Arboga, Delta & Acra
- (2) Eitel RP-10 Hydraulic Straightening Presses
- (2) JF Berns 3” Chamfering Machines
- (2) Fanuc 6 Axis CNC Robots, Mdl M-101A & M16iB, New 2011
- (5) 2006 Roto-Finish Vibratory Deburrers
- Insertion, Hyd. H-Frame and Arbor Presses
- Balance Tech Auto Balancing Machine/ Capitol Technologies, Inc. Automated Assembly Machine, New 2013
- Intersource Chip Processing System/ 2013 Systems Unlimited Inc. Assembly- Inspection Machine; with ASE/Final Phase Inspection Unit
Aqueous & Ultrasonic Part Washers
- Durr Universal 81W Ecoclean Aqueous Parts Washer, New 2014
- Crest Ultrasonics Stainless Steel 4-Station Washer
- Hendricks Engineering Parts Handling System, New 2005
- Jensen 9404 Stainless Steel Tunnel Type Parts Washer
- (5) Midbrook Aqueous Parts Washers, New as 2005
Hundreds of Tool Holders; Indexable Insert Mills & Drills; Boring Bars; Rotary Tables; Inspection Equipment, Numerous Drill Presses, Dennison Presses, Saws, Vidmar Cabinets, Chamfering Machines, Blast Cabinets
